PFE Advanced 10 outputs

Product information

  • Absolutely waterproof (Standard IP65, if breather is replaced with a sealed screw IP67)
  • Framed flat gaskets with large sealing surface
  • Extremely robust and thick-walled aluminium housing
  • All outputs can be programmed without any restrictions
  • Fully integrated wireless solution
  • Brilliant display with menu in plaintext
  • Bi-directional communication and programming
  • Measures and displays the precise resistance of all outputs
  • Up to 100 firings per second possible
  • Integrated, high-brightness firing LEDs on each output for fast testing
  • Optional Sleep Mode available with up to 5 weeks stand-by time

1 charging unit
1 standard antenna
1 user manual
PFE Advanced

Outputs10 / 100 with Matrix Module
Assignment of firing cues without restrictionsYes, 1-999
Firing voltage24 V
Firing current50 A, 17 A continuous current
Firing LEDs for each outputYes
Source of firing energyRechargeable battery
e-matches in series connection / output14 A, 14 U
e-matches in parallel connection / output 20 A, 10 U
e-matches in special serial and parallel connection / output280 A, 140 U
Possibility to activate magnetic valves
(i.e. solenoids)
Control methodsRadio / RS485
Integrated stepping extensionYes, optional, 0.01 – 99
seconds, resolution 10 ms
(i.e. 0.01 s)
Simultaneous stepping sequences per device10 / 100 with Matrix Module
Max. firing rate100 firings / second
Firing duration0.1 s to 25 s, continuous
Short circuit protection of outputsYes
Outputs with intelligent
OK test function
(continuity test of firing lines)
Yes, optical, with precise resistance in 0 to 99 Ohm
Operation time60 h (with optional Sleep Mode up to 35 days)
Remote polling of the parameters of the deviceYes
Remote programming of the parameters of the deviceYes
Remote power-offYes
Acoustic signalsYes
All parameters are adjustable at the deviceYes
Beginners modeYes
Function: Reset to defaultsYes
Radio rangeup to 800 m / 2,000 m
Coverage area2,000,000 m² / 12,500,000 m²
Radio range test functionYes, 0-99 %
Accumulator test functionYes, 0-99 %
Accumulator monitoringYes
Accumulator typeSealed lead acid battery 24 V, 2 Ah
Independent from mains supplyYes
External power supply with 24 VDCYes
HousingExtremely robust aluminium housing made from an extruded aluminum profile
Level of water ingress protectionWaterproof, IP65 / IP67
Breathing membraneYes
LCD display with LED backlightYes, 2 x 16 characters plaintext
IndicatorsDisplay and LEDs multicolor
Temperature monitoringYes
Humidity monitoringYes
Charging unit (included in delivery)Yes
Charging indicatorYes
Car charging adaptor with 12 VDC, 24 VDCoptional equipment
Additional safety featuresCode and magnetic pen
Dimensions103 x 86 x 430 mm
Net Weight4,500 g
Possibility of firmware updatesYes
Multilingual menuYes: German / English
Radio modulesfully integrated
Communicationbi-directional, 999 devices
  • Backup for PFC Advanced Standard
  • DMX Firing Mode
  • External firing key
  • Connection cable USB
  • Connection Cable SMPTE
  • Connection cable DMX
  • DMX/Charge Split Box
  • Zarges case 

Back to Top